SoundCar Digital Sound Decoder

Now your train is no longer limited to locomotive sounds! The 16-bit Tsunami
SoundCar Digital Sound Decoder is the only DCC decoder to replicate railcar
sounds, such as the clickety-clack, flange squeal, flat spots, generator, brake
cylinders, and glad hand release. It also includes a selection of
user-adjustable horns, bells and whistles for cab cars and cabooses. For even
more realism, the decoder has four Hyperlight lighting outputs for interior and
exterior lights.

These
universal-style decoders measure 47mm x 14mm x 8.5mm and are easy to install in
N to G scales. They work with any 8-ohm speaker. For the optimal experience,
use a SoundCar decoder in every third or fourth car in a consist.

The SoundCar also includes a 2-pin plug for optionally using the SoundTraxx

CurrentKeeper

to
maintain sounds and lights during momentary power losses due to finicky wheel
pickups and not-so-perfect track.

BIG Sound Features!

The SoundCar decoder features many new and accurate recordings, most of which
can be customized to accommodate a variety of rolling stock. Furthermore, the
decoder has automated sound sequences and auto-adjusting features for more
realistic operation.

SoundCar Sound Effects

• 
  Brake cylinders
• 
  Brake squeal
• 
  Clickety-clack: Adjustable for 2-, 4- and 6-axle cars
• 
  Coupler clank and pin drop
• 
  Coupler release with glad hand separation
• 
  Flange squeal
• 
  Flat spots
• 
  Emergency brake valve (big hole): Activated when the emergency stop button
  is pressed
• 
  Generators: User-adjustable for reefers and passenger cars
• 
  Hand brake tie down and untie
• 
  Multiple airhorns, air whistle and bells with adjustable ring rates for cab
  cars and cabooses
  • 
    Airhorns: Wabco E2, Nathan K5LA and Hancock air whistle
  • 
    Bells: Cast, electronic and gong
• 
  Retainer bleed-off

Intelligent Consisting Consisting Made Easy

With the SoundCar, your switching sessions can be more realistic than ever! Our
easy-to-use Intelligent Consisting lets you add and remove cars from your train
without tricky programming. When the mode is activated, you can simply wave a
magnet over the cars to quickly cut them in or out of the consist. Just like a
brakeman with a brake club, this action is synced with a sound effect of the
cars hand brakes being tied or untied.

Brilliant Lighting Effects

The SoundCar includes four Hyperlight lighting outputs for adding interior and
exterior lights. The effects can simulate interior coach lights, marker lamps,
flashing rear-end devices (FRED), and more.